Pigeons can be a persistent nuisance, causing mess and potential damage to your property. Pigeon deterrent spikes are an effective and humane way to keep these birds at bay. Here’s a comprehensive step-by-step guide on installing pigeon deterrent spikes, brought to you by Fast Safety Nets Hyderabad.

Step 1: Gather Your Materials and Tools

Before starting the installation, ensure you have all the necessary materials and tools.

Materials Needed:

  • Pigeon deterrent spikes
  • Adhesive (preferably outdoor grade)
  • Screws (optional, for extra security)
  • Cleaning supplies (brush, cloth, detergent)

Tools Needed:

  • Ladder (if needed)
  • Measuring tape
  • Marker or pencil
  • Drill (optional)

Step 2: Clean the Installation Area

Thoroughly clean the surfaces where you will install the spikes. This ensures proper adhesion and effectiveness.

  1. Remove Debris: Brush off any loose dirt, dust, and bird droppings.
  2. Wash Surface: Use detergent and water to clean the area, then let it dry completely.

Step 3: Measure and Mark the Installation Area

Measure the length of the surface where you plan to install the spikes to ensure you cut the spike strips to the appropriate length.

  1. Measure: Use a measuring tape to determine the length.
  2. Mark: Use a marker or pencil to mark the starting and ending points.

Step 4: Cut the Spike Strips (If Necessary)

Most pigeon deterrent spikes come in strips that can be cut to fit your specific needs. Use scissors or a utility knife to cut the strips to the required length.

  • Tip: Cut the spikes into manageable sections if the area is curved or uneven.

Step 5: Apply Adhesive

Apply a generous amount of adhesive to the base of the spike strips. Ensure the adhesive is suitable for outdoor use and can withstand weather conditions.

  1. Spread Evenly: Spread the adhesive evenly along the base.
  2. Press Firmly: Position the spike strip on the marked area and press down firmly to ensure good contact.

Step 6: Secure with Screws (Optional)

For additional security, especially in windy areas, you can use screws to anchor the spikes more firmly.

  1. Drill Holes: If necessary, drill small pilot holes through the base of the spike strip.
  2. Insert Screws: Use screws to secure the spike strip to the surface.

Step 7: Allow Adhesive to Cure

Give the adhesive ample time to cure as per the manufacturer’s instructions. This usually takes several hours.

  • Tip: Avoid disturbing the spikes during the curing period for best results.

Step 8: Inspect the Installation

Once the adhesive has cured, inspect the installation to ensure the spikes are securely in place and there are no loose sections.

  • Inspection Points: Check for firm adhesion, no gaps, and even placement.

Why Choose Fast Safety Nets Hyderabad?

At Fast Safety Nets Hyderabad, we provide high-quality pigeon spikes and professional installation services. Our experts ensure that your property is protected effectively and efficiently from pigeon-related problems.


Installing pigeon deterrent spikes is a simple and effective way to prevent pigeons from roosting on your property. By following this step-by-step guide and choosing Fast Safety Nets Hyderabad, you can maintain a clean and pigeon-free environment. Contact us today for more information and professional assistance with your pigeon control needs.

Protect your property from pigeons with Fast Safety Nets Hyderabad!

Categorized in:

Bird Spikes, Tips,

Last Update: May 24, 2024